Gutter Replacement

Serving Denver Since 1978

720 346 7773

How to install rain gutter in 6 steps

Installing rain gutters is a simple and effective way to protect your home from water damage caused by rain. Rain gutters are an inexpensive way to direct water away from your home’s foundation and other areas of your home that could be damaged by water. Installing rain gutters can be done by a homeowner with some basic tools, but it’s important to understand the process before starting the project. This article will provide step-by-step instructions on how to install a rain gutter system in six steps.

Install Rain GutterStep 1: Measure and Mark

Before buying any materials, it’s important to measure the area where the rain gutters will be installed. Measure the length of the area, keeping in mind that you will need to account for any corners or bends in the gutters. Mark the area with a pencil so you know where to cut the gutters.

 Step 2: Purchase Materials

Now that you have measured and marked the area, it’s time to purchase the materials needed. You will need to buy the gutters, downspouts, hangers, and any other accessories you may need. Be sure to check the measurements of the gutters to ensure they will fit in the area.

 Step 3: Install the Gutters

Once you have purchased the materials it’s time to install the gutters. Start by attaching the hangers to the fascia board. Be sure to use the appropriate screws for the material you are using. Next, cut the gutters to fit the area and attach them to the hangers.

 Step 4: Install Downspouts

The downspouts will help move the water from the gutters to a drainage area away from the home. Start by cutting the downspouts to the desired length and attach them to the fascia board. Be sure to use the appropriate screws for the material you’re using.

Step 5: Connect the Gutters and Downspouts

Now it’s time to connect the gutters and downspouts. Start by cutting the connectors to the appropriate length and attaching them to the gutters and downspouts. You may also need to buy additional connectors to join multiple sections of the gutter or downspout together.

 Step 6: Test and Secure

Once the gutters and downspouts have been connected, it’s time to test them to make sure they are working properly. Fill the gutters with water and make sure that it is flowing freely to the downspouts. If everything seems to be working properly, use screws or sealant to secure the gutters and downspouts in place.

Installing a rain gutter system is a relatively simple process and can be completed by a homeowner in a few hours. By following these six steps you can easily install a rain gutter system that will help protect your home from water damage.